Beautiful 4K pictures, with industry-leading contrast, low operating costs and easy set-up
The SRX-R510DS combines two DCI-compliant SRX-R510 projectors - delivering a total maximum brightness of 18,000 lumens, plus low ownership costs compared with conventional Xenon-based projectors achieving similar light levels.
The SRX-R510DS projector pair can be operated either side-by-side or stacked vertically to suit any projection booth. Set-up is quick and easy, using the smart auto alignment system that comes included with the package.
Audiences are pulled right into the action with immersive 4K detail and rich, lifelike colour. Utilising the 8,000:1 contrast ratio performance of the SRX-R510 projector head, the SRX-R510DS assures best-possible image quality with deep blacks and sparkling highlights.
The reliable HPM (High Pressure Mercury) multi-lamp array ensures show continuity by removing the risk of 'dark screen' outages. Even if one lamp fails during the performance, presentation continues uninterrupted at slightly reduced brightness, without impairing audience enjoyment of the show. Replacement of individual lamp cartridges between screenings is quick and easy, with no need for special protective clothing. Operators can also elect to run each show with a reduced number of lamps lit in line with their operational preferences.
It’s quick and easy to reconfigure the SRX-R510DS between 2D and 3D presentation without requiring lens swaps. Unlike other ‘triple flash’ solutions, 3D with the SRX-R510DS is smooth, natural and easy on the eye.
Technical Specifications
Please be aware that the features/specifications can differ from country to country
Display system
|
Display system
|
4K SXRD projection system
|
Display device
|
Size of effective display area
|
1.48” x 3 per projector
|
|
Number of pixels
|
26,542,080 (4096 x 2160 x 3) pixels per projector
|
Light source
|
Type
|
High-pressure mercury lamp
|
|
Wattage
|
450 W or 330 W type (4 lamps per projector)
|
Light output (average)
|
450 W lamp x 4
|
Max 18,000 lm
|
INPUT OUTPUT
|
Video input
|
HDMI (1) *2
|
|
Audio output
|
Unbalance, 8 channels, 24 bit, 48/96 kHz, linear PCM, D-sub 25-pin (female) (1)
AES/EBU, 16 channels, 24 bit, 48/96 kHz, linear PCM, D-sub 25-pin (female) (1)
|
Playback format
|
JPEG 2000
|
4K 2D: 24p
2K 2D: 24p/25p*3/29.97p*3/30p*3/48p/60p
2K 3D: 24p/29.97p*3/30p*3/48p/60p
|
|
MPEG2*4
|
MP@HL, YUV420 /422 8 bit, 80 Mbps (max.) bitrate, 1920 × 1080, 23.98p/24p/25p
|
Operating temperature (Operating humidity)
|
Operating temperature (Operating humidity)
|
5°C to 35°C (41°F to 95°F) / 35% to 85% (no condensation)
|
Storage temperature (Storage humidity)
|
Storage temperature (Storage humidity)
|
-20°C to +60°C (-4°F to +140°F) / 10% to 90% (no condensation)
|
Power requirements
|
Power requirements
|
AC 200 V to 240 V, 21.5 A to 18 A, 50/60 Hz, Single Phase per projector
|
Dimensions (W x H x D)
|
Dimensions (W x H x D)*5
|
Approx. 548 x 634 x 1119 mm (21 5/8 x 25 x 44 1/8 inches) per projector
|
Mass
|
Mass
|
Approx. 393 kg total system weight (excluding pedestals)
|
Optional accessories
|
Replacement lamp (6 pack)
|
LKRM-U450/LKRM-U331
|
|
Projection lenses (for 2D & 3D)
|
LKRL-Z511/LKRL-Z514/LKRL-Z519
|
|
3D lens filter
|
LKRA-011
|
Notes
|
*1
|
The value is average.
|
|
*2
|
Audio signals included in HDMI cannot be output from the audio output connector of this unit.
|
|
*3
|
Digital watermarking (Watermarking) is not supported.
|
|
*4
|
Digital watermarking (Watermarking) and playback of subtitle files are not supported.
|
|
*5
|
Including lens shift block and feet. Excluding touch panel monitor and projection parts (Status lights, ducts, etc.)
|
|
Environmental notice for customers in the USA
|
Lamp in this product contains mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or see www.sony.com/mercury for additional information.
|
